Version info¶
Version: v1.0.0¶
Date: 30.07.2025
- Fixed added mass calculation (closes #22)
- Implemented a parameter for contact flag DEPTH (closes #23)
- Implemented a parameter to increase positioning beam force (closes #24)
- Added version number to assessment notebook (closes #25)
- Released pelvis constraints 20ms before onset of load (relaxation phase) (closes #26)
- Added belt model with coarse lab belt including updated contact settings for HBM to belt contact (closes #27)
- Deleted unused coordinate system in belt include
Version v0.6.7¶
Date: 20.05.2025
- Corrected the calculation of the initial pelvic angle in the notebook. Calculation is for monitoring purposes only and has no influence on the score. (closes #21)
- Added nodes to seat LC transformation
- Cosmetic changes to references in Readme
Version v0.6.6¶
Date: 26.03.2025
- Modified belt pretension curve for belt fit phase. Necessary for the setup to be applicable to a certain HBM. No influence on HBM response.
- Modified contact settings. Set BSORT and SFS and SFM to default
Version v0.6.5¶
Date: 24.03.2025
- Updated test data curves to start at exact 0. Rerun of notebook required.
- Changed node name "seat" to "testbed" in 02_quality_criteria.def. No influence, as channel is not needed.
Version v0.6.4¶
Date: 14.03.2025
- Corrected seat transformation
- Introduced parameter for cutting time in score calculation in assessment notebook (time_cut_ms)
Version v0.6.3¶
Date: 12.03.2025
- Extended test curves to 110ms for rear load case (closes #20)
- Introduced parameter scalB to scale lab belt segment in case of intersections of belt to HBM (closes #19)
- Changed parameter definition to avoid referencing parameter with "-" before parameter name (movSEz, movFRz)
Version v0.6.2¶
Date: 07.03.2025
- Implemented score calculation to assessment notebook
- Implemented added mass calculation to assessment notebook
- Cosmetic adaptations
Version v0.6.1¶
Date: 06.02.2025
- Renamed test_data_csv in notebook (closes #18)
- Added encoding to be able to read file_master in notebook (closes #17)
Version v0.6.0¶
Date: 03.02.2025
- Relocated mass element to seat base to not influence load cell measurements.
- Updated calculation for the location of the belt anchorage points in SCrear, SC1, SC2 and SC3. (closes #16)
- Renumbered semi rigid seat IDs to facilitate translation to VPS
- Added rib fracture risk plot with NRF=0, NFR=1+, NRF=2+ NRF=3+
Version v0.5.3¶
Date: 13.01.2025
- Fixed simulation time check in assessment notebook (closes #15)
Version v0.5.2¶
Date: 17.12.2024
- Cosmetic changes to assessment notebook.
- Added encoding info to read function of master file (utf-8). Closes issue #14.
Version v0.5.1¶
Date: 09.12.2024
- Added simulation duration check
- Added trajectory plots for head, T1, T8, L2 and pelvis
- Cosmetic changes
Version v0.5.0¶
Date: 09.12.2024
- Removed two initial white spaces in line 437 in file 01a_Seat_semi_rigid_seat_210705.k (closes #13)
Version v0.4.1¶
Date: 05.12.2024
- Update README to reflect that the setup is public
Version v0.4.0¶
Date: 05.12.2024
- Corrected the curve values in the semi rigid seat file (closes #11)
- Added time step definitions to documentation and master file
- Switched test data of lap belt angle between inboard and outboard to reference correct data (closes #12)
Version v0.3.0¶
Date: 28.11.2024
- Update to 01a_Seat_semi_rigid_seat_210705.k file. Included x-sections for left and right load cells (closes #10)
- Fixed binout path in assessment notebook
- Update to instrumentation requirements in Documentation_Sled.pdf
Version v0.2.6¶
Date: 20.11.2024
- Update to 02_Belt.k and 02_Belt_shorter.k files. Seatbelt node 22000005 constrained to PID: 13029000
It is expected that no re-run is required as the node was fixed to the B5/b6 belt fixation.
Version v0.2.5¶
Date: 18.11.2024
- Update to 03_Boundary_Condition.k file (closes #8 and #9)
Version: v0.2.4¶
Date: 30.10.2024
- Introduction of a parameter to rotate the lap belt segment if intersections to the HBM occur. (closes #6)
- Update IDs and organize keywords in semi-rigid seat model (closes #7)
Version: v0.2.3¶
Date: 25.10.2024
- Backrest deleted to be consistent with other frontal setups (closes #5)
Version: v0.2.2¶
Date: 22.10.2024
- Update sled load curves. Values are split by commas instead of semicolons (closes #4)
- Update boundary ID to avoid double usage of same ID (closes #4)
- Delete needle elements in rigid seat parts (closes #4)
Version: v0.2.1¶
Date: 16.10.2024
- Update setup dictionary in notebook for .png files to be saved (closes #3)
Version: v0.2.0¶
Date: 15.10.2024
- The model of the seat load cells was modified. The simulations without an occupant were also rerun and the resulting reference curves were updated. (closes #1)
- Belt model with shorter lap belt segment is provided. (closes #2)
Version: v0.1.1¶
Date: 11.10.2024
Remove internal testing notebooks from repository.
No re-run required as no relevant files have changed.
Version: v0.1.0¶
Date: 10.10.2024
Initial beta version release for testing within the QualiPro HBM4VT group.