Version info¶
Version: v1.0.1¶
Date: 19.08.2025
- Updated IDs of fixation beam nodes to correlate with testbed IDs. Rerun required for load case Config 4 only. (closes #36)
Version: v1.0.0¶
Date: 29.07.2025
- Fixed added mass calculation in assessment notebook (closes #24)
- Implemented a parameter for contact setting DEPTH (closes #25)
- Implemented a parameter to increase positioning beam force (closes #26)
- Added version number to assessment notebook (closes #27)
- Changed buckle joint from spherical to revolute (closes #28)
- Removed initial side plate transformation to be consistent with test setup (closes #29)
- Updated nodes set for lap belt transformation in belt includes (closes #30)
- Renumbered testbed include to follow consistent numbering scheme (closes #33)
- Corrected parallel 1D material (closes #34)
-
Updated test data time channel to start at t0 (closes #35)
-
Changed "seat" node to "testbed" in 02_quality_criteria.def. Channel is not needed.
- Updated IDs in retractor include file to facilitate conversion to VPS
- Update IDs of acromion nodouts
- Changed parameter definition to avoid referencing parameter with "-" before parameter name (movSEz, movFRz)
- Modified contact settings. Set BSORT and SFS and SFM to default
Version: v0.7.6¶
Date: 07.03.2025
- Implemented added mass calculation to assessment notebook
- Cosmetic adaptations
Version: v0.7.5¶
Date: 13.01.2025
- Added rib fracture risk plot with NRF=0, NFR=1+, NRF=2+ NRF=3+
Version: v0.7.4¶
Date: 13.01.2025
- Fixed simulation time check in assessment notebook (closes #23)
Version: v0.7.3¶
Date: 19.12.2024
- Added information on the procedure to determine the shoulder belt angle in more detail to the documentation. (closes #22)
- Added error termination guide to the documentation
Version: v0.7.2¶
Date: 17.12.2024
- Updated contact ID in include 01a_Testbed_Seat_Side_Plate.k
- Added PMHS data reference and trajectories to assessment notebook
- Changed corridor appearance and added label
- Cosmetics
Version: v0.7.1¶
Date: 10.12.2024
- Updated calculation for the target time for simulation time check in assessment notebook (closes #21)
Version: v0.7.0¶
Date: 09.12.2024
- Corrected value for LMIN in 2D belt elements (closes #20)
Version: v0.6.1¶
Date: 09.12.2024
- Added simulation duration check
- Cosmetic changes
- Added PMHS data to README.md
Version: v0.6.0¶
Date: 06.12.2024
- Corrected value for the D-ring transformation in x-axis. (closes #19)
Rerun only required for configuration 4.
Version: v0.5.3¶
Date: 05.12.2024
- Update README
Version: v0.5.2¶
Date: 04.12.2024
- Increased LMIN for 1D belt elements (closes #15)
- Adapted transition path from two parallel belt to single belt (closes #16)
- Corrected material for single belt part (closes #17)
Version: v0.5.1¶
Date: 04.12.2024
Revert the belt angle calculation back to the one used until v0.4.0.
Re-run only required if when using the latest notebook (from v0.5.1), the resulting belt angle is outside the given range for the respective configuration (which is not expected).
Version: v0.5.0¶
Date: 02.12.2024
Update to belt angle calculation. It is now measured correctly between D-ring and clavicle (closes #18):
- Added mid left clavicle node to *DATABASE_HISTORY_NODE
- Update to metadata files
- Update to the belt angle calculation in the assessment notebook
- Update to the instrumentation section in the Documentation
Version: v0.4.0¶
Date: 05.11.2024
- Updated load case definition. Up to 6 predefined load cases can be chosen. (closes #7)
- Added contact between side plate and belt (closes #8)
- Fixed distorted elements in seat (closes #9)
- Increased friction coefficient between the HBM and the seat to 0.7. (closes #10)
- Updated location of H-point and D-ring (closes #11)
- Added acromion output (closes #12)
- Updated target torso angle (closes #13)
- Corrected cross section ID in ID file (closes #14)
- Add PMHS data
Version: v0.3.0¶
Date: 10.10.2024
- Updated sled prescribed motion
- Updated mass of back rest
- Typos fixed
Version: v0.2.0¶
Date: 16.09.2024
- Updated belt material
- Added new rotated (and longer) optional belt includes
- Separated seat side plate transformation
- Changed
*SET_NODE_COLLECTto*SET_NODE_LISTto ensure consistent results in all pre-processors
Version: v0.1.0¶
Date: 02.09.2024
Initial beta version release